We're Open
Serving Tampa, Orlando, Fort Lauderdale, Miami and beyond
Before & After
Click on a photo to enlarge.
Greg B. of Land O’ Lakes, FL called LRE Foundation Repair looking for a solution to his home's uneven concrete after noticing his driveway, sidewalk, and patio were no longer level. After completing a whole home inspection, it was clear Greg’s uneven concrete was not the only issue. The driveway had not been sealed, causing stains that detracted from the home’s appearance. To remedy Greg’s concrete problems, LRE’s 3-part concrete protection system was recommended. The 3-part concrete protection system involves a product called PolyLevel which is a fast-expanding polymer foam that is used to permanently stabilize and level concrete. After, a tinted sealer called DecoShiled is applied to the concrete to protect and seal the concrete while adding a nice even color. To finish, all of the cracks and joints are sealed with NexusPro to eliminate water from penetrating underneath the concrete. After the work was completed, Greg was pleased to see his homes concrete free of trip hazards and increased curb appeal.
In North Port, Florida, a section of Vasyl’s concrete driveway had cracked and settled significantly, creating a major trip hazard. Wanting a reliable solution that didn’t involve a full concrete replacement, he contacted LRE Foundation Repair to schedule a free inspection with one of our expert Design Specialists.
During the inspection, we discovered that soil erosion beneath the driveway was the root cause of the sinking and cracking. To restore safety and stability, our team implemented our Two-Part Concrete Protection System. First, we used PolyLevel to lift, level, and stabilize the sunken concrete slabs. Then, we sealed the cracks and joints with NexusPro to prevent water intrusion and further soil erosion.
Not only did this solution address the safety concern, but the NexusPro also improved the driveway’s curb appeal. Vasyl was thrilled with the outcome and now has peace of mind knowing the trip hazard has been permanently removed.
Monica, a homeowner in Port Orange, Florida, had grown concerned about her concrete driveway, which had developed widespread cracking and uneven slabs due to settlement damage. Rainwater would regularly pool at the front and center of the driveway—sometimes even entering her garage—and years of wear had left the surface stained and discolored.
Looking for a lasting solution, Monica reached out to us at LRE Foundation Repair. After a thorough inspection by our Design Specialist, we recommended our Three-Part Concrete Protection System to fully restore and protect her driveway.
Monica approved the plan, and our team got to work. First, we used PolyLevel to lift, level, and stabilize the sunken slabs. Next, we sealed the cracks and joints with NexusPro to stop water intrusion and prevent future erosion. To finish the job, we applied DecoShield, giving the concrete a uniform gray tint while protecting it from future staining, chipping, and UV damage.
Now, Monica’s driveway isn’t just repaired—it’s transformed. It’s level, protected, and looks better than ever.
Carrie from Sebring, Florida, noticed that over the years, her home’s concrete pool deck had gradually settled, leaving the slabs uneven with the pool’s edge and creating serious tripping hazards. Wanting a dependable solution that didn’t involve tearing out and replacing the concrete, she reached out to us at LRE Foundation Repair. After a thorough inspection, our Design Specialist recommended lifting, leveling, and permanently stabilizing the pool deck using our innovative PolyLevel system. Carrie approved the plan, and our team got to work—successfully restoring the slabs to a safe, even level. Now, Carrie can enjoy her pool area with confidence, knowing it’s both secure and protected from future settlement.
Howard, a homeowner in Palm Bay, Florida, reached out to LRE Foundation Repair after noticing a large void beneath his concrete driveway, along with multiple surface cracks that had developed over time. Worried that the damage would worsen and potentially cause the concrete to break apart under the weight of his truck, Howard was eager to find a reliable solution before the problem escalated.
After a thorough inspection by one of our expert Design Specialists, we proposed a customized repair plan using our Three-Part Concrete Protection System. This comprehensive approach began with injecting PolyLevel beneath the slabs to fill the voids and lift the settled concrete. Next, we sealed the cracks with NexusPro to prevent water infiltration and further deterioration. To complete the project, we applied our DecoShield surface sealant to enhance the driveway’s durability and appearance, protecting it from chipping, flaking, and staining while providing a uniform gray finish.
In a short amount of time, Howard’s concrete driveway was fully restored—leveled for stability, protected against future damage, and visually enhanced, giving him long-term peace of mind and a significant boost in his home’s curb appeal.