LRE Foundation Repair Before & After Photos

Joe in Eustis, Florida, needed his concrete driveway repaired after severe soil settlement caused the slabs to crack and become uneven, creating multiple tripping hazards. He called LRE Foundation Repair, and one of our expert Design Specialists conducted a thorough inspection to provide a solution that didn’t require replacing the concrete.

Our specialist recommended the Two-Part Concrete Protection System to level the slabs and repair the cracks. Joe approved, and our team got to work: first, PolyLevel was injected beneath the concrete to permanently lift, level, and stabilize the slabs. Next, NexusPro sealed the cracks and joints to prevent water from seeping underneath and causing future soil settlement.

When the project was complete, Joe’s driveway was fully restored, leveled, and protected against future settlement damage.

In Palm Coast, Florida, James’s driveway had developed a significant tripping hazard as the concrete slabs had become severely uneven over time. Concerned about potential injury to himself or others, he reached out to us at LRE Foundation Repair to schedule a free inspection and explore available repair solutions.

We sent one of our expert Design Specialists to James’s home to inspect the concrete and discovered that soil erosion beneath the driveway had caused the slabs to settle. To address this, we developed a comprehensive repair plan using our Two-Part Concrete Protection System to fully level and restore the driveway.

First, our team used PolyLevel to lift, level, and permanently stabilize the slabs by injecting the solution directly beneath the concrete. Next, the joints between the slabs were sealed with NexusPro to prevent water from seeping below the surface and causing further soil erosion.

Upon completion, James’s concrete driveway was fully leveled and permanently stabilized, giving him peace of mind knowing the tripping hazard has been eliminated for good.

In North Port, Florida, a section of Vasyl’s concrete driveway had settled so drastically that the slabs became dangerously uneven, creating serious tripping hazards. After reaching out to LRE Foundation Repair, one of our expert Design Specialists conducted a thorough inspection of the concrete. Upon confirming that soil erosion was the cause for the concrete to settle, our team implemented the Two-Part Concrete Protection System to fully level and stabilize the affected area.

First, we injected PolyLevel beneath the slabs to lift, level, and stabilize the concrete while filling any underlying voids. Then, we sealed the cracks and joints with NexusPro to block water infiltration and prevent future soil erosion beneath the surface.

Vasyl was thrilled with the results and now enjoys a smooth, safe driveway—knowing it’s permanently stabilized and worry-free.

Karen in DeLand, Florida, had recently remodeled her kitchen when she began noticing that the floors felt unstable under the added weight. Since her home included a large crawl space, she reached out to LRE Foundation Repair for an inspection to identify potential structural issues.

After a free evaluation by our Design Specialist, we designed a plan to permanently stabilize the home’s floor joists using our advanced SmartJack system. Once Karen approved the plan, our team installed each SmartJack in the crawl space, carefully adjusting them to provide strong, reliable support beneath the kitchen.

With the system in place, Karen can now enjoy her remodeled kitchen with confidence, knowing the crawl space beneath her home is permanently stabilized.

The concrete slabs of the entranceway of a local church in Orange City, Florida, had settled over time, creating serious tripping hazards that needed repair. The pastor of the church contacted LRE Foundation Repair for help, seeking a safe and effective solution without replacing the concrete. We scheduled a free inspection with our Design Specialist, and after assessing the site, they discovered that soil settlement beneath the entrance had caused the concrete to sink and become unstable. We proposed a repair plan using our Three-Part Concrete Protection System.

First, PolyLevel was injected beneath the slabs to lift, level, and permanently stabilize them. Next, NexusPro was applied to the joints to prevent water from seeping under the concrete and causing further settlement. Finally, SealantPro was added to protect the surface from chipping, flaking, and staining.

The result? A fully leveled and stabilized entrance that’s safe, durable, and ready for years of use.