Concrete Leveling Before & After Photos

Uneven slabs in Angela’s concrete driveway at her home in Spring Hill, Florida, had created a significant tripping hazard that required urgent repair to prevent potential injuries. She contacted LRE Foundation Repair for assistance, and we promptly sent one of our expert Design Specialists to inspect the issue. After a thorough assessment, our specialist confirmed that soil settlement beneath the driveway had caused the slabs to sink.

To resolve the problem, we proposed a comprehensive repair plan using our Two-Part Concrete Protection System. Angela approved the solution, and our team began by leveling the uneven slabs with PolyLevel. Once the slabs were restored to their proper height, we sealed the joints with NexusPro to protect against water intrusion and prevent future settlement.

With the project complete, the tripping hazard was fully eliminated, and Angela can now enjoy peace of mind knowing her driveway is both safely restored and permanently stabilized.

Richard from Spring Hill, Florida, noticed that the concrete walkway leading from his driveway had settled significantly, creating a serious tripping hazard that needed to be addressed. After calling us at LRE Foundation Repair and scheduling a free inspection, we sent out one of our Design Specialists to take a closer look and provide a solution.

Upon inspecting the sunken concrete slabs and confirming that the underlying soil had settled, a plan was created to have our team utilize our PolyLevel solution to lift, level, and stabilize the walkway. With Richard’s approval, our crew carefully began injecting PolyLevel directly beneath the slabs, successfully bringing them back up to their proper, even level. Now, Richard no longer has to worry about potential tripping hazards, as his concrete walkway is not only fully leveled but also permanently stabilized.

Seeking to restore his concrete driveway, Carl, from Spring Hill, Florida, reached out to LRE Foundation Repair for assistance. An LRE Design Specialist found great potential to rejuvenate the driveway by implementing the Three-Part Concrete Protection System. This solution involves utilizing PolyLevel to elevate and level any sunken sections of the concrete, NexusPro to seal cracks and joints, and DecoShield to safeguard the driveway from staining, chipping, or flaking while providing a consistent, uniform gray tint across the entire concrete surface. After the LRE team completed the project, Carl's driveway is fully safeguarded against settling, staining, and cracking.

Carol had a section of her home’s driveway in Spring Hill, Florida, damaged by a nearby tree root, leaving the concrete slabs uneven with each other. The resulting trip hazard had become a clear concern for her and she needed to address the problem before any serious injuries could occur. After scheduling a free inspection with LRE Foundation Repair, a Design Specialist visited her home and assessed the damage. The specialist confirmed for Carol that once the tree root was properly removed the uneven concrete could be lifted and leveled with the PolyLevel solution. Once the homeowner had the roots removed, the LRE team successfully eliminated the concrete trip hazard by injecting PolyLevel underneath the slabs to elevate them to an even, safe level. Carol no longer has to worry about any injuries occurring in her driveway, and she can have peace of mind knowing that the concrete is now completely secure. 

The floors in Dave's Safety Harbor, Florida, home exhibited noticeable signs of sinking and separation from the walls above. A Design Specialist from LRE Foundation Repair had discovered that the interior concrete slab under the floors had shifted due to poorly compacted soil supporting the foundation. The LRE team raised and stabilized the sinking interior slab using the PolyLevel® solution. Dave was thrilled to see the gaps between the floors and walls had closed and felt a renewed sense of relief now that his home was stabilized.