Concrete Leveling Before & After Photos

Check out this incredible transformation of Richard's driveway in Inverness, FL! Notice in the before photo how the uneven driveway slabs posed a serious trip hazard—a common issue we see in homes. Instead of opting for a full concrete replacement, which is often costly and disruptive, we applied our PolyLevel solution. As you can see in the After photo, the driveway is now perfectly leveled, creating a safe and aesthetically pleasing entrance to the home. Our mission held true: providing a lasting and reliable fix that not only resolved the issue but also significantly improved the homeowner’s daily experience.

Sections of Andre’s concrete front patio of their Inverness, Florida, home had become uneven, with some areas having sunk almost an inch. Wanting to avoid any potential injuries from the trip hazards, Andre reached out to us at LRE Foundation Repair to find a reliable fix. Our Design Specialist visited their home and inspected the patio, verifying that the concrete had sunk due to settlement of the underlying soil. Our production team utilized PolyLevel to lift and level the sunken slabs by directly injecting the polymer foam underneath the concrete. Now Andre’s patio is not only back to it’s proper level, but the concrete is also permanently stabilized.

Rick and Susan were worried about a major trip hazard that had developed in the concrete walkway that led up to the front door of their home in Odessa, Florida. A Design Specialist from LRE Foundation Repair visited their home to inspect the trip hazard and identified that soil settlement and roots from an adjacent tree had caused the concrete to sink at least three inches below ground level. The LRE team successfully leveled the concrete and effectively eliminated the trip hazard by injecting PolyLevel underneath the sunken slab. Rick and Susan experienced a sense of relief to see the trip hazard removed, providing them with peace of mind that their walkway was not only leveled but also permanently stabilized.

The concrete walkway leading to Tina’s front porch in Odessa, Florida, had developed into a significant tripping hazard. One of the concrete slabs was elevated off the surface of the ground, creating a height difference of several inches in comparison to the adjacent slab. After reaching out to LRE Foundation Repair for assistance, a Design Specialist visited Tina’s home to inspect the concrete and help devise a solution. Upon examining the walkway, the specialist found that a tree root under the concrete had caused one of the slabs to heave, lifting it above the other. Following the removal of the tree root, the LRE team stabilized the soil underneath the concrete and successfully lifted the slab back to its proper level using the PolyLevel solution. The trip hazard has been completely eliminated, and the concrete walkway is now stabilized with an even, level surface. Tina is now free from the concern of injury, with peace of mind knowing that the trip hazard is gone for good.

Edward in Pinellas Park, Florida, contacted us at LRE Foundation Repair with a concerning issue with his concrete driveway. The slabs positioned above a culvert pipe had broken off and settled onto the pipe itself, creating a major dip and tripping hazard in the driveway, while also crushing the pipe. One of our Design Specialists visited Edward’s home and discovered a significant amount of soil had washed out from beneath the driveway, creating a void that caused the slabs to lose their support and sink in the process. Our production team used PolyLevel by injecting the two-part polymer foam directly underneath the concrete slabs to fill the void and level the slabs. The concrete slabs are now back to their proper, even level, and the void below is completely filled, providing Edward with the peace of mind that his concrete driveway is now permanently stabilized.