Concrete Repair Before & After Photos

Ronald was looking to enhance the dull appearance of his home’s concrete walkway in Spring Hill, Florida, and called LRE Foundation Repair for a solution. Upon assessing the concrete's condition, an LRE Design Specialist informed Ronald that not only could the concrete be improved visually, but it could also be permanently stabilized using the Two-Part Concrete Protection System. With Ronald’s approval, the LRE team began implementing this system by first, stabilizing the concrete with the PolyLevel solution. PolyLevel is used to lift and relevel sunken areas of concrete. Following this, NexusPro was used to fill the joints and cracks, preventing debris accumulation and water from seeping below the concrete. Once completed, the concrete walkway not only boasts a fresh, clean look but is also protected from damage for many years to come.

This driveway in Oldsmar, Florida, had become a safety hazard due to uneven slabs, making it both dangerous and unsightly. Our team at LRE Foundation Repair inspected the area and found that shifting soil was causing the problem. We used our PolyLevel process to lift and level the driveway, making it smooth and safe again. The homeowners were very pleased with the results, as their driveway now looks great and will stay stable for years to come.

Bill from Inverness, FL, had recently purchased his new home when he noticed that a section of the concrete driveway had settled significantly due to large voids that had formed beneath the slabs. After calling LRE Foundation Repair to inspect the driveway, our Customer Care team scheduled a free appointment with one of our local expert Design Specialists.

Upon close inspection, our specialist determined that the underlying soil had washed out over time, leaving the concrete slabs without adequate support. Our team injected PolyLevel directly beneath the driveway to fill the voids and lift, level, and stabilize the slabs.

Within minutes, Bill's concrete driveway was restored to its proper level and stabilized against further settlement, giving him peace of mind as he settled into his new home.

After purchasing his new home in Inverness, FL, Bill immediately noticed that part of the concrete driveway had sunk, leaving the slabs uneven and posing significant tripping hazards. Seeking an effective repair solution, he contacted LRE Foundation Repair for a complimentary inspection.

One of our local Design Specialists visited Bill’s home and inspected the concrete and discovered that soil erosion had created large voids beneath the concrete, causing the slabs to settle. To restore the driveway’s level, our team injected PolyLevel beneath the affected slabs, filling the voids and carefully lifting the concrete back to its proper position.

The project was completed quickly, leaving Bill with a level, stable driveway and greater peace of mind as he settled into his new home.

Ann from Inverness, FL, contacted LRE Foundation Repair after noticing the concrete slabs along her walkway had gradually become uneven. She had also spotted cracks forming in her driveway and wanted to avoid the time and expense of a full concrete replacement.

After a thorough inspection, our Design Specialist recommended a repair plan using our 3-Part Concrete Protection System. The process began by lifting and stabilizing the settled slabs with PolyLevel. Next, the joints in the walkway and cracks in the driveway were sealed with NexusPro to prevent water from getting beneath the concrete while also improving the appearance. Finally, the entire surface was treated with SealantPro to help protect against chipping, flaking, and staining.

Once Ann approved the plan, our team got to work leveling, repairing, and stabilizing the concrete. Now her walkway and driveway are restored and protected—without the need for a full replacement.