Concrete Repair Before & After Photos

Ronald was looking to enhance the dull appearance of his home’s concrete walkway in Spring Hill, Florida, and called LRE Foundation Repair for a solution. Upon assessing the concrete's condition, an LRE Design Specialist informed Ronald that not only could the concrete be improved visually, but it could also be permanently stabilized using the Three-Part Concrete Protection System. With Ronald’s approval, the LRE team began implementing this system by first, stabilizing the concrete with the PolyLevel solution. Following this, NexusPro was used to fill the joints and cracks to prevent debris accumulation and water from seeping below the concrete. Finally, the team applied the DecoShield solution to seal the concrete's surface, protecting the walkway from chipping and flaking, and providing it with a gray tint coating. Now Ronald's concrete walkway not only boasts a fresh, clean look but is also protected from damage for many years to come.

This driveway in Oldsmar, Florida, had become a safety hazard due to uneven slabs, making it both dangerous and unsightly. Our team at LRE Foundation Repair inspected the area and found that shifting soil was causing the problem. We used our PolyLevel process to lift and level the driveway, making it smooth and safe again. The homeowners were very pleased with the results, as their driveway now looks great and will stay stable for years to come.

Debbie’s concrete driveway in Brooksville, Florida, had developed a serious tripping hazard that needed to be addressed before it led to any injuries. She reached out to LRE Foundation Repair for a solution, and we promptly sent a Design Specialist to inspect the issue. 

During the inspection, our specialist found that soil erosion caused by runoff from a nearby downspout had led to the concrete slabs settling. To restore the driveway, we recommended using PolyLevel to lift, level, and permanently stabilize the slabs. Once Debbie approved the plan, our team quickly got to work, successfully leveling the settled slab and ensuring long-term stabilization.

Now, Debbie can enjoy peace of mind knowing her driveway is safe, stable, and free from any tripping hazards.

Debbie from Brooksville, Florida, reached out to LRE Foundation Repair for help with leveling an uneven slab in her concrete driveway. Over time, soil settlement had caused the slab to sink, creating a serious tripping hazard.

After a thorough inspection, our Design Specialist recommended using PolyLevel to lift, level, and permanently stabilize the slab. With Debbie’s approval, our production team injected PolyLevel beneath the driveway, successfully raising the slab back to its proper position. Now, Debbie’s driveway is smooth, even, and free of trip hazards, ensuring long-lasting stability and safety.

Tom from Brooksville, Florida, reached out to us at LRE Foundation Repair seeking assistance with repairing his concrete driveway, which had developed numerous cracks and become uneven. One of our expert Design Specialists visited Tom’s home to inspect the driveway and found that soil settlement had caused the concrete to sink by about six inches and develop cracks on the surface. A plan was created to implement our Two-Part Concrete Protection System to fully repair and stabilize the driveway’s concrete. Our team soon went to work implementing this comprehensive solution by first injecting PolyLevel directly underneath the concrete to level the slabs and stabilize the underlying soil. Next, the cracks and joints in the driveway were sealed with NexusPro to prevent water intrusion and enhance curb appeal. Upon completion, Tom was delighted to see that his concrete driveway was now fully repaired and permanently stabilized.