Concrete Leveling Before & After Photos

John from Titusville, Florida, noticed a significant trip hazard forming in his home’s concrete driveway, raising serious concerns about potential injuries that needed to be addressed immediately. He contacted us at LRE Foundation Repair and scheduled a free inspection with one of our expert Design Specialists to find an effective solution. After carefully assessing the driveway’s condition, our specialist determined that soil erosion beneath the concrete had caused the slabs to settle, resulting in an uneven surface.

To correct the issue, our team injected our PolyLevel solution directly beneath the concrete to lift and level the settling slabs. Within just a few minutes, John’s driveway was restored to a safe, even surface, and the trip hazard was fully eliminated. Now, John and his family can enjoy lasting peace of mind, knowing the risk of tripping injuries has been effectively removed.

Lisa had a problem with her back patio at her home in Lehigh Acres, Florida. She noticed a significant crack that had formed right down the center of the slab, which posed a potential trip hazard and looked unsightly. To fix this, she contacted LRE Foundation Repair for assistance. Upon inspection, a Design Specialist identified soil washout beneath the concrete as the root cause for the slab to settle. To address the patio's concrete, the LRE team implemented the Two-Part Concrete Protection System. They used PolyLevel to lift and level the slabs and employed NexusPro to seal the crack and prevent water intrusion. Lisa was thrilled with the outcome, as the crack is now sealed, and the settling slab has been leveled and stabilized.

Brad P. started noticing the gap between his back patio and walls getting larger, allowing more moisture in from the outside of his Lake Placid, Florida home. He wanted his foundation leveled and gaps closed before more potential damage could occur. He decided to call LRE Foundation Repair, who came out to his home quickly and completed a full-home inspection. LRE determined that loose, shifting soils under his home caused the foundation to sink and turned to PolyLevel injection for the permanent solution. PolyLevel is a polyurethane expanding foam material that is injected through the concrete slab and around the outside of the home to fill voids, stabilize loose soils, and lift the foundation back into place. This homeowner was pleasantly surprised to see the gaps closed and could rest easy knowing no further damage would occur.

Residents of an apartment complex in Bonita Springs, Florida, contacted LRE Foundation Repair to address multiple trip hazards that had developed in the concrete sidewalk in front of their building. After our Design Specialist inspected the concrete and confirmed that the underlying soil had settled, we developed a plan to use our PolyLevel solution to lift, level, and permanently stabilize the uneven slabs. With the residents' approval, our team injected PolyLevel directly beneath the concrete, leveling the slabs within minutes and eliminating the trip hazards. The residents are now relieved of any injury concerns and can safely continue to use their sidewalk with peace of mind.

The concrete pad supporting Mark's AC unit at his Merritt Island, Florida, home had slowly sunk into the ground over time, creating a significant trip hazard. He requested LRE Foundation Repair to inspect the concrete, and a Design Specialist identified that soil washout had caused the pad to sink. To lift and level the concrete, as well as stabilize the soil below, the LRE team injected the PolyLevel Solution under the pad. The concrete pad was successfully lifted and leveled, and Mark was delighted to see the trip hazard permanently eliminated.