Concrete Leveling Before & After Photos

Ray, from Madeira Beach, Florida, contacted LRE Foundation Repair to request assistance with fixing up concrete slabs behind his home that had become uneven. He originally had a hot tub positioned on top of the slabs, but had it removed when he realized the concrete was no longer stable. Following a thorough inspection by an LRE Design Specialist, it was discovered that a large amount of soil under the concrete had washed away, causing the slabs to settle and become uneven. To fill the voids and level the concrete, the LRE team utilized the PolyLevel solution. Following this, the team sealed the cracks and joints with NexusPro to prevent water from intruding beneath the concrete. With the combination of these solutions, Ray’s concrete was now fully repaired and permanently stabilized.

LRE Foundation Repair was asked by Ray in Madeira Beach, Florida, to help repair and stabilize the concrete walkway leading up to the back patio of his home. A Design Specialist first inspected the concrete and found that rainwater had washed out a significant amount of soil underneath the walkway, creating a large void and causing the concrete to settle. The LRE team utilized the Two-Part Concrete Protection System to fully repair and permanently stabilize the concrete. First, PolyLevel was injected underneath the concrete to fill the voids and level the slabs. The next step involved applying NexusPro to seal the cracks and joints of the concrete, preventing any further water intrusion underneath the walkway. Ray’s concrete walkway is now fully repaired and permanently stabilized, with a level surface and protection against future settlement issues.

In St. Petersburg, Florida, Michael noticed a section of his home's floor had sunk, creating visible gaps between the flooring and adjacent walls. Since the home rests on a concrete slab, this suggested the underlying soil had settled, causing the slab to shift. After calling LRE Foundation Repair for a free inspection, our Design Specialist confirmed the issue and recommended using our PolyLevel solution to lift and stabilize the interior slab. Michael agreed, and our team injected PolyLevel beneath the slab, effectively raising it back to its proper level and closing the gaps. With his home’s interior concrete slab now stabilized, Michael can enjoy lasting peace of mind.

Michael from St. Petersburg, Florida, grew concerned when part of his floor began to sink, leaving noticeable gaps between the floor and the nearby walls. He reached out to LRE Foundation Repair for a complimentary inspection, and our Design Specialist quickly identified the cause of the issue. Because the home is built on a concrete slab, our specialist pinpointed  soil settlement as the cause for the slab to sink. To correct the problem, we recommended our PolyLevel solution to lift and stabilize settled concrete slabs. With Michael’s approval, our team got to work, injecting PolyLevel beneath the affected area to restore the floor to its proper level. With the gaps closed and the slab stabilized, Michael can now feel assured that his home’s concrete slab foundation is now permanently secure.

In St. Petersburg, FL, Jason had just purchased his new home and needed to have a few notable repairs completed before moving in. One particular area of concern was the interior concrete slabs within one section of the home, which had settled significantly, leaving large gaps between the floors and adjoining walls. After giving LRE Foundation Repair a call, our Customer Care team scheduled a free appointment with one of our local expert Design Specialists to conduct a full home inspection.

Upon arriving at the home, our specialist determined that severe soil erosion had occurred beneath the home in various areas and created a comprehensive repair plan to fully lift and stabilize the foundation. The plan included stabilizing the foundation perimeter with helical piers and lifting the interior concrete slabs with PolyLevel. Jason reviewed and approved the plan, and our team soon began the repairs.

After the helical piers were installed, our team injected PolyLevel directly beneath the interior slabs to fill any voids and carefully lift them back to their proper position. Once the work was completed, the gaps between the floors and walls were closed, providing Jason with the assurance that the foundation and interior concrete slabs of his new home were now fully repaired and stabilized.