Concrete Leveling Before & After Photos

Carol’s concrete walkway in Weeki Wachee, Florida, had settled so severely that the slabs became dangerously uneven, creating a serious tripping hazard. Wanting to prevent potential injuries, Carol reached out to LRE Foundation Repair for help.

After a thorough inspection by our expert Design Specialist, we discovered the underlying issue: soil erosion had caused the slabs to sink. To fix the problem, our team used PolyLevel, injecting the two-part polyurethane foam beneath the walkway to lift, level, and stabilize the concrete.

Now Carol’s walkway is safely restored to its proper level, and she has peace of mind knowing the risk of tripping hazards has been eliminated for good.

Several tripping hazards had developed across Carol’s concrete walkway at her home in Weeki Wachee, Florida, prompting her to reach out to LRE Foundation Repair for assistance. During the inspection, our Design Specialist discovered that soil erosion beneath the walkway had caused the slabs to settle and become uneven. To fully lift, level, and stabilize the slabs, our team injected PolyLevel directly beneath the concrete. Within just minutes, the walkway was restored to its proper, even level—eliminating the tripping hazards for good. Now, Carol can enjoy using her walkway without worrying about injuries, knowing the concrete has been permanently stabilized.

In Palm Coast, Florida, James’s driveway had developed a significant tripping hazard as the concrete slabs had become severely uneven over time. Concerned about potential injury to himself or others, he reached out to us at LRE Foundation Repair to schedule a free inspection and explore available repair solutions.

We sent one of our expert Design Specialists to James’s home to inspect the concrete and discovered that soil erosion beneath the driveway had caused the slabs to settle. To address this, we developed a comprehensive repair plan using our Two-Part Concrete Protection System to fully level and restore the driveway.

First, our team used PolyLevel to lift, level, and permanently stabilize the slabs by injecting the solution directly beneath the concrete. Next, the joints between the slabs were sealed with NexusPro to prevent water from seeping below the surface and causing further soil erosion.

Upon completion, James’s concrete driveway was fully leveled and permanently stabilized, giving him peace of mind knowing the tripping hazard has been eliminated for good.

In North Port, Florida, a section of Vasyl’s concrete driveway had settled so drastically that the slabs became dangerously uneven, creating serious tripping hazards. After reaching out to LRE Foundation Repair, one of our expert Design Specialists conducted a thorough inspection of the concrete. Upon confirming that soil erosion was the cause for the concrete to settle, our team implemented the Two-Part Concrete Protection System to fully level and stabilize the affected area.

First, we injected PolyLevel beneath the slabs to lift, level, and stabilize the concrete while filling any underlying voids. Then, we sealed the cracks and joints with NexusPro to block water infiltration and prevent future soil erosion beneath the surface.

Vasyl was thrilled with the results and now enjoys a smooth, safe driveway—knowing it’s permanently stabilized and worry-free.

The concrete slabs of the entranceway of a local church in Orange City, Florida, had settled over time, creating serious tripping hazards that needed repair. The pastor of the church contacted LRE Foundation Repair for help, seeking a safe and effective solution without replacing the concrete. We scheduled a free inspection with our Design Specialist, and after assessing the site, they discovered that soil settlement beneath the entrance had caused the concrete to sink and become unstable. We proposed a repair plan using our Three-Part Concrete Protection System.

First, PolyLevel was injected beneath the slabs to lift, level, and permanently stabilize them. Next, NexusPro was applied to the joints to prevent water from seeping under the concrete and causing further settlement. Finally, SealantPro was added to protect the surface from chipping, flaking, and staining.

The result? A fully leveled and stabilized entrance that’s safe, durable, and ready for years of use.